-
{{ item.quantity }}
- Home /
- Aicohol Extraction System /
- UltraX-15 Closed-Loop Alcohol Extraction System
UltraX-15 Closed-Loop Alcohol Extraction System
SKU: 1000
Our centrifuge based technology enables the ability to target and extract specific botanical compounds to achieve desired separation.
CATEGORY
UltraX-15 Closed-Loop Alcohol Extraction System
Our centrifuge based technology enables the ability to target and extract specific botanical compounds to achieve desired separation.The UltraX-15 ALCOHOL EXTRACTION SYSTEM combines closed-loop,cold alcohol extraction with mechanical centrifugation ensuring high-purity extractions.
Features:
- Closed-Loop System
- 3rd Party Engineer Reviewed
- UL Listed US/Canada
- 304 &316L Sanitary Stainless Steel
- Vacuum Jacket Insulation
- Easy Material Loading/Unloading
- Bi-Directional Agitation
- Variable Speed Control
- Heavy-Duty Spin Drying
- 12Month Parts/Labor Warranty
- Technical Support
- Designed in USA
Product Overview:
The UltraX-15 combines closed-loop alcohol extraction with centrifugal technology, ensuring consistent results conveniently by a single operator. A touch screen HMI features a menu with various agitation and spin-dry cycles, each of which is programmable to the operator’s specifications. With a run time of only 10-20 Minutes and a throughput of approximately 300 lbs Per 8-hour work day, this system will efficiently attain Your processing goals.
Standard Features:
Vessel
- 304 and 316L Stainless Steel Construction
- (1)Alcohol Feed Port:1.5” Sanitary Triclamp Fittings
- (1)1.5”Tri-clamp; Remote Discharge Vent and Pressure Relief Port
- 2”Tri-Clamp Angled Drain
- Liquid/Vapor Tight(No pressure) Vessel with EPDM Lid Seal
Footprint
- UltraX-15:w/o Auxiliary components (37”L×25.5W×52”H)
- Master Panel Not Shown: (24”L×32”W×52”H)
- Recommended Total Footprint Of Extraction Area:UltraX, Control Panel, Tanks, Filter, Pump (15ftW×5ftD×8ftH)
Controls
- Industrial Hazloc control panel
- Touchscreen HMI
- 20ft Tethered main control panel (Installed outside of hazloc)
- Emergency stop
- Variable frequency drive:0-1800 RPM
Electrical
- 230V,30 amp, single-phase
- UL certified class 1 div 2 , 3HP motor
- UL-NEMAL6-R30 Plug
- UL-L6-30(30A-250V)
Operation
Through the HMI,the operator may access 2 different programs: Agitation and spin-dry. Each program has three cycle presets, two of which are programmable (will save long term) and one being manual (will not save long term). To begin, the operator fills a mesh bag with botanical material and places the bag in the system. After sealing the system properly, it is than filled with alcohol and agitated using the ’Agitation’ program. When the ’Agitation’ program is complete, the operator opens the drain valve allowing the saturated alcohol to drain into an appropriate discharge container. After draining, the operator may now select the ’Spin-Dry’ program where the residual alcohol will be removed through centrifugal force.
1)Loading the System
A mesh bag is filled and packed evenly with botanical mater.The bag is then sealed with the zipper, and placed in the basket of the vessel.
2)Filling the System
The system is sealed and filled with approximately 15 gallons of alcohol, which may be done either pneumatically(with a pump+ air compressor) or with gaseous nitrogen.
3)Agitation
The ’Agitation’ program bi-directionally spins the basket with the botanical material and alcohol, extracting approximately 98% of the target compounds.
4)Draining
When the ’Agitation’ program is Complete, the drain valve is opened to allow the alcohol to drain into an appropriate discharge container.
5)Spin-Dry
Leaving the drain valve open, the ’Spin-dry’ program is chosen and the basket is spun at high speeds to centrifugally remove approximately 97% of any residual alcohol.
6)System Unloading
Once the ’Spin-Dry’ program is finished and the basket has stopped spinning, the lid may be opened and the bag removed. The botanical matter has now been stripped of its target compounds and may be disposed of properly.
7)Repeat
The system is loaded again and the same 15 gallons of alcohol may be re-used for multiple extractions until fully saturated (approximately 3 bags or 45 lbs)


Standard export for shipping
Port:Shanghai
Package Type: Wooden Case
Q: How long is the delivery time?
A: 60 working days for 220V or 380V, after we received your payment or order confirmed.
Q: What is the warranty for the equipment?
A: One year. We can provide you lifelong technical support.
Q: What is the payment terms?
A: T/T, L/C,PayPal,Western Union, etc.
Q: What after-sales service can be provided by NewLabX ?
A: The after-sales service of NewLabX is divided into two parts: technical support and maintenance.
Q: What about the technical support and maintenance?
A: Sometimes users will get some problems when they operate the instruments which are unfamiliar or first time use, users can send us emails or call us about detailed information. We will provide users solution or operation video.For so many years’ experience, our instruments works well during warranty period. If there any parts are broken during warranty period, we would like to provide spare parts for free.