-
{{ item.quantity }}
- Home /
- Aicohol Extraction System /
- UltraX-30 Closed-Loop Alcohol Extraction System
UltraX-30 Closed-Loop Alcohol Extraction System
SKU: 1000
The UltraX-30 Alcohol Extraction System is our large capacity centrifuge system that uses programmable sequences to target and extract your desired compounds from botanical biomasses.
CATEGORY
UltraX-30 Closed-Loop Alcohol Extraction System
The UltraX-30 Alcohol Extraction System is our large capacity centrifuge system that uses programmable sequences to target and extract your desired compounds from botanical biomasses. Utilizing closed-loop technology with mechanical centrifugation, the UltraX-30 ensures the easy delivery of high-purity extractions.
Features:
- Closed-Loop System
- 3rd Party Engineer Reviewed
- UL Listed US/Canada
- 304 &316L Sanitary Stainless Steel
- Vacuum Jacket Insulation
- Easy Material Loading/Unloading
- Bi-Directional Agitation
- Variable Speed Control
- Heavy-Duty Spin Drying
- 12 Month Parts/Labor Warranty
- Technical Support
- Designed in USA
Product Overview:
The UltraX-30 is an all-in-one system that combines closed-loop cold alcohol extraction with mechanical centrifugation, ensuring high-quality results with the benefit of a larger capacity. A touchscreen HMI features a program menu with various wash/agitation and spin/ dry cycles, all programmable to the operator’s specifications to effectively target the desired separation. With a run time of only 15-20 minutes with a throughput of up to 600 lbs per 8-hour day, this system ensures high-quality crude oil in a fraction of the time.
Standard Features:
Vessel
- (1)Alcohol Feed Port:1.5” Sanitary Triclamp Fittings
- (1)1.5”Tri-clamp; Remote Discharge Vent and Pressure Relief Port
- 2”Tri-Clamp Angled Drain
- Liquid/Vapor Tight(No pressure)Vessel with EPDM Lid Seal
Dimensions
- UltraX-30:w/o Auxiliary components(49”L×27.5”W×58.5”H)
- Main Control Panel:(24”L×32”W×54”H)
- Main Frame Weight:890 lbs/404 kg
Controls
- Industrial Hazloc control panel
- Touchscreen HMI
- 20ft Tethered control panel(Installed outside of hazloc)
- Emergency stop
- Variable frequency drive:0-1500 RPM
Electrical
- 230V,30 amp, Three-Phase
- 5HP Motor
- UL-NEMA L15-30 Plug
Included Ancillary Equipment
(1)30 Gallon Jacketed Stainless Steel Discharge Vessel
- Dimensions 30”L×30”W×24”H
- Weight×114lbs/52kg
- Dimensions-39”L×18”W×56”H
- Weight×113lbs/51kg
Extraction Cycle:
The UltraX-30 offers 3 program cycles: spray wash, agitation wash and spin dry cycle. Each program cycle has (2) programmable auto recipes and (1)programmable manual recipe. The operator fills filter bag with milled plant material and places it in the system where it is spun at varying speeds while injecting alcohol at controlled rates. The system can also be flooded, and bi-directionally agitated for full target compound removal. After the wash, the plant material undergoes a medium duty spin dry, leaving the spent plant material 97% free of tincture with up to 98% target compound removal. The alcohol wash is then used for another 2-3 runs of material or diverted to a mixing tank for further processing.
1)System Loading
A preloaded filter bag is placed into the basket and the system is sealed to begin the cycle.
2)Wash Cycle
The "Spray Wash" or “Agitation Wash” program is selected on the program menu where the RPM and cycle times are set to the operator’s specifications.
3)Alcohol Fill
Chilled alcohol is pneumatically pumped from source tank into the CUP system via an inlet valve or spray nozzle.
4)Extraction Begins
The plant material undergoes either a spray wash or an agitated wash with a set number of bi-directional agitations aimed at extracting 98% of plant desirables.
5)System Draining
When the wash cycle is complete, the outlet valve is opened and the system is drained. The alcohol wash is pumped to a properly rated storage reservoir for further processing.
6)Spin Dry Cycle
The ”Spin Dry” program is selected on the program menu and the drying cycle is started. The wet plant solids are spun dry of the remaining alcohol mixture within.
7)System Unloading
When the dry cycle is complete,the operator can retrieve the filter bag from the basket.
Standard export for shipping
Port:Shanghai
Package Type: Wooden Case
Q: How long is the delivery time?
A: 60 working days for 220V or 380V, after we received your payment or order confirmed.
Q: What is the warranty for the equipment?
A: One year. We can provide you lifelong technical support.
Q: What is the payment terms?
A: T/T, L/C,PayPal,Western Union, etc.
Q: What after-sales service can be provided by NewLabX ?
A: The after-sales service of NewLabX is divided into two parts: technical support and maintenance.
Q: What about the technical support and maintenance?
A: Sometimes users will get some problems when they operate the instruments which are unfamiliar or first time use, users can send us emails or call us about detailed information. We will provide users solution or operation video.For so many years’ experience, our instruments works well during warranty period. If there any parts are broken during warranty period, we would like to provide spare parts for free.